Architectural Commercial Entry Doors
- Standard and custom sizing available
- High-Performance Low-E4® glass stays cleaner and reduces water spotting
- Low-profile mill-finished sill with optional bronze or brass anodized finishes available
- Thick aluminum cladding finish meets AMMA 2605 standards
- Complies with accessibility requirements for commercial and residential applications
- Standard and custom jamb widths up to 11-1/2 inches
| Base Price: | $1,588
Whats in the price?
|
| Size: | 3' 1-5/8" W x 7' 1-5/16" H |
View more sizes, prices and configure your door
|
Grille Patterns |
Grille patterns may be different than those shown below based on the size of the unit. See your Andersen dealer for more information.
Standard Patterns
Colonial
Modified
ColonialModified Colonial
Check RailPrairie A
Short
FractionalShort Fractional
Check RailTall
FractionalTall Fractional
Check Rail
Specified Equal Light Patterns
2 Wide
1 High3 Wide
1 High4 Wide
1 High1 Wide
2 High2 Wide
2 High3 Wide
2 High4 Wide
2 High1 Wide
3 High2 Wide
3 High3 Wide
3 High4 Wide
3 High1 Wide
4 High2 Wide
4 High3 Wide
4 High4 Wide
4 High1 Wide
5 High2 Wide
5 High3 Wide
5 High4 Wide
5 High
|
Custom Patterns
|
| Please contact your Andersen dealer or contractor to create a custom grille |
Grille Types |
- Finelight Grilles are installed between glass panes
- Removable Interior Grilles
- Removable Interior Grilles with Permanent Exterior Grilles
- Permanent Exterior and Permanent Interior Grilles
- Permanent Exterior and Permanent Interior Grilles with Spacer
|
Grille Finishes & Colors |
Interiors
Pine
Oak
Maple
Alder
Douglas Fir
Cherry
Mahogany
White
Pine is only available for permanently applied grilles.
Removable interior grilles are available standard in maple, also available in oak.
Exteriors
White
Sandtone
Terratone®
Forest Green
Prairie Grass
DarkChestnut
Black
Canvas
River Rock
Driftwood
Coral Green
Red Rock
Dark Bronze
MidnightBlue
Birch Bark
Dove Gray
Slate
Blue Spruce
Terra Cotta
Cocoa Bean
Dark Ivy
Grille Widths |
Finelight Grilles
Available for 400 Series and Architectural windows and patio doors, in both 3/4" and 1" profile. Interior grille color matches the exterior color if the interior of the window or door is wood. If interior window or door color is prefinished white, interior grille color will be white. See your Andersen dealer for more information.
Standard width for all windows
Available with windows, but more often used on patio doors
Available with windows, but more often used on patio doors
Used to simulate a check rail. Available only with permanently applied grilles.
Chamfer profile for permantly applied grilles shown above.
Not all patterns and options may be available in all grille types, see your Andersen Dealer for more information.
Download more information about grilles (PDF) Exterior of glass only, when activated by sunlight. A study of identical homes comparing Low-E to ordinary dual-pane glass showed a 25% savings on cooling bills, 10% on heating. Savings may vary geographically.
Appropriate selection of Andersen windows, doors, and accessories which conform to all applicable laws, ordinances, building codes and safety requirements is the sole responsibility of the architect, building owner and/or contractor. Check with your local Andersen supplier and building code officials for specific information.
The product information available on this website is not, and is not intended to be complete. Be sure to verify with your architect or contractor that the windows, patio doors and accessories you select are suitable for your project. Your local Andersen dealer can then confirm availability and actual prices.
Individual computer and monitor settings may prevent exact product color and hardware finish duplication. Please see your Andersen dealer for exact color and finish samples.
